Xi'an Aojie Electric Heating Equipment Engineering Co., Ltd.
Outstanding Quality and Best Service!
Add to Cart
The high temperature brazing furnace can be used in many industries, such as automobile, diesel engine, aero-space & aviation, air conditioning, refrigeration, gas water heater and so on for carbon steel, stainless steel, cooper ceramic parts' brazing and bright heat treatment.
| Model |
RCWE12-
13×180×8
|
RCWE12-
18×260×16
|
RCWE12-
22×260×16
|
RCWE12-
22×300×16
|
RCWE9-
31×280×30
|
| Rated Power | 30 | 45 | 60 | 60 | 90 |
| Max Operating Temperature | 1150 | 1150 | 1150 | 1150 | 950 |
| Belt Width(mm) | 130 | 180 | 220 | 220 | 310 |
|
Work Zone (W×L×Hmm) |
160×1800×80 | 210×2600×160 | 260×2600×160 | 260×3000×160 | 350×2800×300 |
| Protective Atmosphere | Exothermic, Dissociated Ammonia, Mixed Nitrogen Hydrogen, Pure Hydrogen | ||||
| Model |
RCWE12-
31×300×16
|
RCWE12-
31×300×22
|
RCWE12-
35×350×20
|
RCWE12-
40×350×24
|
RCWE12-
42×350×30
|
| Rated Power | 90 | 100 | 100 | 110 | 120 |
| Max Operating Temperature | 1150 | 1150 | 1150 | 1150 | 950 |
| Belt Width(mm) | 310 | 310 | 350 | 400 | 420 |
|
Work Zone (W×L×Hmm) |
350×3000×160 | 350×3000×220 | 390×3500×200 | 450×3500×245 | 460×3500×300 |
| Protective Atmosphere | Exothermic, Dissociated Ammonia, Mixed Nitrogen Hydrogen, Pure Hydrogen | ||||
The difference between welding and brazing
The welding is pressured by heating, or both, to use or do not use filler material to make the workpieces as a whole. So brazing is one method of welding.
Brazing is one of the three major welding process methods, which is different from fusion welding and pressure welding, fusion welding uses external heating (eg. electric arc), to make local areas on the interface of the connected member heated melted and cooled, and then it is formed as joint. Its characteristic lies in the melting of the base material. Pressure welding is to apply pressure, to bring the atomic spacing of the welded surface close to the lattice distance. At the same time, in the resistance welding, the parent material has melting phenomenon
Brazing is the connection of brazed parts by melting metal (solder), the parent material does not melt. This is one of the characteristic
Working principle of mesh belt brazing furnace
The mesh belt brazing furnace adopts strong reducing gas as the protective atmosphere, it is suitable for mass production of small and medium stainless steel parts, such as martensite stainless steel bright quenching tempering, austenite stainless steel bright annealing.
The furnace type design is novel, the net belt transmission is stable, the surface after heat treatment is bright, the hardness is even, the deformation is small, continuous type produced, no grade adjustable, the process parameter is easy to control, the temperature control accuracy is high.